This premium brass stock sheet, designed for lubricating applications, offers superior wear resistance and controlled friction. Its precise dimensions ensure seamless integration into demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.740" |
| Length | 16" |
| Width | 34" |
Built to exacting engineering tolerances, this 0.740" thick brass stock sheet measures 16" in length and 34" in width. Composed of a specific brass alloy known for its self-lubricating properties and excellent machinability, it exhibits a low coefficient of friction ideal for reducing wear in sliding components. The material's inherent corrosion resistance further enhances its suitability for environments where moisture or chemical exposure is a concern, ensuring long-term performance and reliability in critical machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare mating surfaces, ensuring they are clean, smooth, and free of debris. 2. Accurately cut the brass stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated brass component to the intended application, ensuring proper alignment and minimal stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation of mating parts. | Thoroughly clean and deburr all mating surfaces before installation to prevent premature wear. |
| Using incorrect cutting tools, leading to burrs or deformation. | Employ sharp, high-quality cutting tools designed for brass to achieve clean, precise cuts. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearing surfaces, Wear plates in sliding mechanisms, Self-lubricating bushings and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||