This 0.737-inch thick Nylon stock sheet is engineered for robust performance in pneumatic systems. Its superior strength and durability make it ideal for critical components and custom fabrication in industrial settings.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.737" |
| Length | 47" |
| Width | 40" |
Designed for demanding industrial environments, this 0.737-inch thick Nylon stock sheet offers exceptional tensile strength, abrasion resistance, and a low coefficient of friction. Measuring 47 inches in length and 40 inches in width, it is manufactured from high-grade Nylon, ensuring reliability and longevity in high-pressure pneumatic applications. Its material properties allow for excellent machining characteristics, making it suitable for custom-fabricated manifold blocks, wear pads, and internal components where resistance to impact and chemical exposure is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Machine or form the cut material according to design specifications for pneumatic components. 3. Install the fabricated Nylon parts into the pneumatic system, ensuring proper seals and clearances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect machining speeds, leading to excessive heat and deformation. | Employ slower cutting speeds and ensure adequate coolant is used during machining to prevent thermal degradation of the Nylon. |
| Over-tightening fasteners, causing stress fractures in the Nylon component. | Utilize torque-limiting tools and appropriate washer designs to distribute load evenly, avoiding localized stress concentrations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic manifold fabrication, Wear-resistant components for cylinders, Sealing elements and gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||