This high-grade carbon steel stock sheet, engineered to precise dimensions, is a foundational component for robust electrical and lighting infrastructure, offering exceptional durability and formability.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.736" |
| Length | 34" |
| Width | 15" |
Specified by design engineers worldwide, this 0.736" thick carbon steel stock sheet meets stringent industry requirements. With a standard width of 15" and a length of 34", its composition offers excellent tensile strength and weldability, crucial for demanding electrical enclosure fabrication and durable lighting fixture construction. The material's inherent magnetic properties and resistance to deformation ensure reliable performance in various environmental conditions, making it a preferred choice for custom fabrications and high-volume production runs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material specifications against project requirements. 2. Prepare sheet edges for cutting, bending, or welding according to design tolerances. 3. Implement appropriate fabrication techniques to achieve desired component geometry.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or incorrect thickness for load-bearing applications. | Always confirm the specified thickness (0.736") and material grade are adequate for the anticipated structural loads and environmental stresses. |
| Improper surface preparation leading to poor weld adhesion or finish. | Thoroughly clean the steel surface to remove oils, scale, and contaminants before any welding, painting, or coating processes. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Electrical Enclosures & Cabinets, Lighting Fixture Housings, Control Panel Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||