This premium brass stock sheet, precision-manufactured to 0.735" thickness, is engineered for demanding lubricating applications. Its inherent material properties ensure excellent performance and longevity in critical components.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.735" |
| Length | 42" |
| Width | 20" |
Specified by design engineers worldwide, this 0.735" thick brass stock sheet (42" length x 20" width) leverages brass's inherent self-lubricating properties and excellent machinability. Its dimensional stability and resistance to corrosion make it ideal for sliding surfaces, wear plates, and bearing components in machinery requiring reduced friction and extended service life. The material's ductility allows for forming and fitting into complex geometries, ensuring optimal performance in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Accurately cut the brass stock sheet to the required dimensions. 3. Securely fasten the brass sheet to the designated location using appropriate fasteners or adhesives, ensuring flush contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor contact and increased wear. | Thoroughly clean and degrease both the brass sheet and the mating surface before installation. |
| Over-tightening fasteners, which can deform the brass and compromise its lubricating function. | Use torque-limiting tools to ensure fasteners are tightened to the manufacturer's recommended specifications. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Wear plates in heavy machinery, Self-lubricating bearing surfaces, Guideways and sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||