This high-performance 0.734-inch thick Nylon stock sheet, measuring 16x18 inches, is specifically engineered for the rigorous demands of pneumatic systems, providing superior durability and precision.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.734" |
| Length | 16" |
| Width | 18" |
Engineered for reliability and performance, this 0.734-inch thick Nylon stock sheet boasts a 16-inch length and 18-inch width, ideal for custom fabrication of pneumatic components. Its inherent strength, excellent abrasion resistance, and low coefficient of friction make it suitable for seals, wear pads, and structural elements within hydraulic and pneumatic cylinders, valves, and control systems. The material's dimensional stability ensures consistent performance under varying pressure and temperature conditions, minimizing leakage and maximizing operational efficiency. This grade of Nylon exhibits good chemical resistance to oils and greases commonly found in pneumatic environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the precise dimensions required for the component using appropriate cutting tools for plastics. 2. Machine or form the cut material to its final shape, ensuring tight tolerances for critical mating surfaces. 3. Install the finished component into the pneumatic system, verifying proper fit and function before pressurization.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to chipping or melting of the Nylon. | Utilize sharp, specialized plastic cutting tools such as carbide-tipped saws or laser cutters for clean and precise cuts. |
| Overheating the material during machining, causing deformation or reduced performance. | Employ adequate cooling lubricants and control machining speeds to prevent excessive heat buildup during fabrication. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Seals and Gaskets for Pneumatic Cylinders, Wear Strips and Bushings in Actuator Assemblies, Internal Components for Pneumatic Valves and Regulators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||