This robust 0.733" thick Nylon stock sheet, measuring 30" x 47", is engineered for superior self-lubricating properties. Ideal for components requiring reduced friction and enhanced wear resistance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.733" |
| Length | 30" |
| Width | 47" |
Specified by design engineers worldwide, this lubricating grade Nylon stock sheet provides exceptional performance characteristics. Its dense matrix, precisely manufactured to a 0.733" thickness, 30" length, and 47" width, offers excellent tensile strength, impact resistance, and a naturally low coefficient of friction. This material is chemically inert, resistant to abrasion, and suitable for applications involving continuous movement and moderate load-bearing requirements. Ideal for wear strips, bushings, guides, and other sliding components where lubrication is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 3. Fasten the fabricated component securely, ensuring even pressure distribution to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to localized stress and potential cracking of the Nylon. | Use appropriate torque settings and consider incorporating washers to distribute load. |
| Using incompatible adhesives or solvents that can degrade the Nylon material. | Consult the material data sheet for recommended bonding agents and cleaning solvents. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides in conveyor systems, Self-lubricating bushings and bearings, Slide plates for automated machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||