This robust carbon steel stock sheet, measuring 0.732 inches thick by 18 inches wide and 28 inches long, is engineered for demanding industrial applications where strength and durability are paramount. Its substantial gauge ensures superior load-bearing capacity and impact resistance.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.732" |
| Length | 18" |
| Width | 28" |
Engineered for reliability and performance, this carbon steel stock sheet possesses a nominal thickness of 0.732 inches (approximately 18.6mm), a width of 28 inches (711.2mm), and a length of 18 inches (457.2mm). Constructed from high-grade carbon steel, it offers exceptional tensile strength and yield strength, making it suitable for applications requiring significant structural integrity. Its composition provides excellent weldability and machinability, facilitating complex fabrication processes in diverse environments. The sheet's substantial mass contributes to vibration dampening and enhanced impact protection, crucial for safety-critical installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Precisely mark and drill mounting holes according to design specifications. 3. Securely fasten the carbon steel sheet using appropriate industrial-grade fasteners, ensuring even torque distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using fasteners with insufficient shear strength for the intended load. | Select fasteners that are rated to exceed the maximum anticipated shear and tensile forces exerted on the sheet. |
| Inadequate surface preparation leading to poor adhesion or premature corrosion. | Thoroughly clean the steel surface and the mounting area to remove all dirt, grease, and existing coatings before installation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Structural reinforcement and bracing, Fabrication of machine guards and safety barriers, Industrial flooring and platforms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||