This robust carbon steel stock sheet provides exceptional strength and durability. Its substantial thickness and dimensions make it a prime choice for critical fabrication and structural applications in challenging industrial settings.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.727" |
| Length | 47" |
| Width | 20" |
Designed for demanding industrial environments, this carbon steel stock sheet boasts a nominal thickness of 0.727 inches, a length of 47 inches, and a width of 20 inches. Manufactured from high-grade carbon steel, it offers superior tensile strength and formability, making it suitable for a wide range of fabrication tasks. Its consistent material properties ensure predictable performance in applications requiring structural integrity, such as heavy machinery components, chassis construction, and robust enclosures where resilience and load-bearing capacity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface condition against project requirements. 2. Prepare edges for welding or joining according to fabrication standards. 3. Secure sheet in place using appropriate clamping or fixturing prior to fabrication processes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for high-stress applications. | Ensure material grade and thickness are specified for the intended load and stress requirements; consult material data sheets. |
| Inadequate edge preparation for welding. | Properly bevel and clean all edges to ensure complete weld penetration and structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy machinery fabrication, Structural components, Industrial enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||