This premium brass stock sheet is engineered for demanding lubricating applications. Its precise dimensions and inherent material properties ensure optimal performance and longevity in industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.727" |
| Length | 39" |
| Width | 28" |
A high-performance industrial component, this brass stock sheet is manufactured to exacting tolerances, measuring 0.727 inches in thickness, 39 inches in length, and 28 inches in width. Composed of high-grade brass, it exhibits excellent inherent lubricity, corrosion resistance, and moderate strength, making it ideal for applications requiring reduced friction and wear. Its dense microstructure minimizes porosity, ensuring reliable performance under continuous operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the receiving surface is clean and free of debris. 2. Carefully position the brass stock sheet according to the design specifications. 3. Secure the sheet using appropriate fastening methods, such as rivets, bolts, or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient fastening, leading to premature sheet movement or detachment. | Utilize fasteners with adequate tensile and shear strength, and ensure proper spacing for uniform load bearing. |
| Ignoring surface preparation, resulting in poor adhesion or compromised lubrication. | Thoroughly degrease and clean both the brass sheet and the mounting surface before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces, Low-friction guides, Wear plates in machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||