High-strength carbon steel stock sheet, precisely manufactured for demanding pneumatic system construction. Engineered for superior durability and performance in critical industrial environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.724" |
| Length | 40" |
| Width | 29" |
Specified by design engineers worldwide, this 0.724" thick carbon steel stock sheet offers exceptional structural integrity for pneumatic applications. With dimensions of 40" in length and 29" in width, its robust carbon steel composition provides superior resistance to impact and wear. Ideal for fabricating heavy-duty pneumatic enclosures, support structures, and custom components requiring significant load-bearing capacity and long-term operational reliability in harsh industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any surface defects or damage. 2. Cut sheet to precise dimensions according to pneumatic system design specifications. 3. Fabricate and assemble into desired pneumatic component or enclosure, ensuring all welds and fastenings meet structural integrity requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized material for high-pressure pneumatic components. | Always verify material thickness and grade against design load requirements to prevent component failure. |
| Inadequate surface preparation before welding or coating. | Thoroughly clean and degrease the carbon steel surface to ensure optimal weld penetration and coating adhesion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder construction, Air receiver fabrication, Custom pneumatic manifold bases.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||