This robust 0.724" thick carbon steel stock sheet, measuring 23" x 40", is engineered for demanding suspending and bracing applications. Its high tensile strength ensures reliable support in critical structural assemblies.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.724" |
| Length | 23" |
| Width | 40" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a nominal thickness of 0.724 inches, a length of 23 inches, and a width of 40 inches. Composed of high-grade carbon steel, it exhibits excellent tensile strength, yield strength, and hardness, making it ideal for applications requiring substantial load-bearing capacity and resistance to deformation. Its dense microstructure ensures durability and longevity under stress. This material is well-suited for fabrication into custom brackets, supports, and structural components where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the sheet for desired cuts based on project specifications. 2. Utilize appropriate cutting tools (e.g., abrasive saws, plasma cutters) suitable for 0.724" carbon steel. 3. Fabricate and install components using approved welding, bolting, or fastening methods, ensuring adherence to structural engineering standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners instead of high-strength, corrosion-resistant hardware. | Always specify and use fasteners rated for the load and environment, typically hardened steel or stainless steel for corrosive conditions. |
| Inadequate edge preparation or weld joint design for critical load-bearing connections. | Ensure all edges are properly prepared for welding (e.g., beveling) and that weld joint designs meet or exceed relevant structural codes and engineering calculations. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy-duty structural bracing in industrial facilities, Custom fabrication of support beams and hangers, Load-bearing components in construction and infrastructure projects.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||