This heavy-duty carbon steel stock sheet is engineered for critical suspending and bracing applications. Its substantial thickness and robust material ensure exceptional load-bearing capacity and long-term structural integrity.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.724" |
| Length | 20" |
| Width | 19" |
A high-performance industrial component, this carbon steel stock sheet boasts a precise thickness of 0.724 inches, a length of 20 inches, and a width of 19 inches. Fabricated from high-grade carbon steel, it exhibits superior tensile strength, yielding point, and impact resistance, making it ideal for enduring significant static and dynamic loads. Its dimensional stability and inherent toughness ensure reliable performance in demanding environments, providing a steadfast foundation for critical infrastructure and heavy machinery support.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare mounting surfaces for adequate load distribution. 2. Securely fasten the stock sheet using appropriate heavy-duty hardware (e.g., structural bolts, welding). 3. Verify alignment and ensure all connections are torqued to specification for optimal load transfer.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate hardware selection for the sheet's thickness and intended load. | Utilize structural-grade fasteners or welding procedures specifically rated for the operational stress and the 0.724" steel thickness. |
| Overlooking surface preparation, leading to compromised contact and potential stress points. | Ensure mounting surfaces are clean, flat, and free of contaminants to guarantee uniform contact and prevent premature failure. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Heavy machinery support structures, Overhead structural bracing, Industrial platform suspension.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||