This premium brass stock sheet offers superior dimensional stability and corrosion resistance, ideal for critical measuring and inspection tasks. Its robust construction ensures consistent performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.724" |
| Length | 38" |
| Width | 30" |
Built to exacting engineering tolerances, this brass stock sheet features a precise thickness of 0.724 inches, a substantial length of 38 inches, and a width of 30 inches. Composed of a high-quality brass alloy, it exhibits excellent machinability, good electrical conductivity, and inherent corrosion resistance, making it suitable for applications requiring dimensional accuracy and longevity. Its dense, non-magnetic nature further enhances its utility in sensitive metrology and inspection setups where interference must be minimized.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface where the sheet will be used is clean and level. 2. Carefully position the brass stock sheet in its intended location. 3. Secure the sheet using appropriate fasteners if permanent installation is required.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the sheet on uneven or unstable surfaces, leading to inaccurate measurements. | Always mount or place the brass stock sheet on a perfectly flat and rigid surface to maintain its inherent accuracy. |
| Exposing the brass to harsh chemicals or abrasive materials that can degrade its surface finish and dimensional integrity. | Clean the brass sheet with mild, non-abrasive cleaners and avoid contact with corrosive substances to preserve its precision and lifespan. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision measuring and layout tools, Inspection fixtures and jigs, Calibration standards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||