This robust 0.723-inch thick Nylon stock sheet offers exceptional strength and durability. Precisely manufactured to 18" x 42", it's engineered for demanding fabrication tasks requiring superior impact and wear resistance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.723" |
| Length | 18" |
| Width | 42" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a nominal thickness of 0.723 inches, with precise dimensions of 18 inches in length and 42 inches in width. Nylon, known for its excellent tensile strength, high abrasion resistance, and good chemical inertness, makes this sheet ideal for components subjected to mechanical stress and wear. Its low coefficient of friction also contributes to its suitability for moving parts. The material's inherent toughness ensures reliability in diverse environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools (e.g., industrial saw with a fine-tooth blade). 3. Smooth any rough edges with a deburring tool or fine-grit sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect cutting blade, leading to chipping or melting of the Nylon. | Utilize sharp, specialized blades designed for plastics or composites, and maintain a suitable cutting speed to minimize heat buildup. |
| Over-tightening fasteners, which can cause stress cracks in the Nylon material. | Employ washers to distribute load and tighten fasteners to a snug fit, avoiding excessive torque, especially in thin sections. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guide rails, Gears and sprockets, Bushings and bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||