This lubricating grade carbon steel stock sheet is engineered for demanding applications requiring superior lubricity and wear resistance. Its robust construction ensures exceptional performance and longevity in dynamic environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.722" |
| Length | 41" |
| Width | 20" |
Precision-manufactured to tight tolerances, this carbon steel stock sheet boasts a significant 0.722" thickness, providing exceptional structural integrity. Measuring 41" in length and 20" in width, it is ideal for custom fabrication and large-scale components. The inherent properties of carbon steel, combined with its lubricating grade, offer excellent machinability and a low coefficient of friction, making it suitable for sliding components, bearings, and wear plates where reduced friction and extended service life are critical. Its robust composition resists deformation under significant load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface to be lubricated is clean and free of debris. 2. Precisely cut the carbon steel stock sheet to the required dimensions for the application. 3. Securely install the fabricated component, ensuring proper alignment with mating parts for optimal friction reduction.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for high-friction applications. | Always select lubricating grade carbon steel for components experiencing significant sliding or friction to prevent premature wear and heat buildup. |
| Inadequate surface preparation before installation. | Thoroughly clean and deburr the stock sheet and mating surfaces to ensure smooth operation and prevent damage. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Bearing surfaces, Wear plates, Sliding mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||