This robust 0.720" thick polycarbonate sheet offers exceptional impact resistance and clarity. Measuring 13"x34", it's engineered for durability and versatility in challenging industrial environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.720" |
| Length | 13" |
| Width | 34" |
Manufactured under strict quality controls, this 0.720" thick polycarbonate sheet exhibits superior impact strength, exceeding that of acrylic and glass by a significant margin. Its optical clarity remains high even under extreme conditions, and it is resistant to UV degradation and a wide range of chemicals. The sheet's dimensions of 13 inches by 34 inches make it suitable for custom fabrication of protective barriers, machine guarding, sight glasses, and architectural glazing where safety and durability are paramount. Its excellent thermal insulation properties also contribute to energy efficiency in certain applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mounting surfaces thoroughly. 2. Pre-drill holes slightly larger than fastener diameter to allow for thermal expansion. 3. Secure sheet using appropriate fasteners with neoprene washers to prevent stress points and seal against moisture.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks. | Use hand-tightening and allow for thermal expansion by using oversized holes and compressible washers. |
| Using abrasive cleaners or solvents that can damage the polycarbonate surface. | Employ mild soap and water with a soft cloth for cleaning. Consult the manufacturer's guidelines for approved cleaning agents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Barriers, Sight Glasses, Glazing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||