This robust 0.720-inch thick nylon stock sheet offers exceptional durability and wear resistance. Ideal for custom fabrication, wear pads, and structural components in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.720" |
| Length | 36" |
| Width | 45" |
Specified by design engineers worldwide, this 0.720" thick Nylon stock sheet measures 36" in length and 45" in width, providing ample material for complex fabrication. Its inherent toughness, high tensile strength, and excellent abrasion resistance make it suitable for applications demanding resistance to impact, wear, and chemical exposure. The material's low coefficient of friction also contributes to its utility in moving parts and bearing surfaces. This specific grade of nylon is engineered for consistent performance under significant mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools (e.g., band saw, CNC router). 2. Smooth all cut edges to remove burrs and ensure a clean finish. 3. Secure the fabricated nylon component using appropriate fasteners or adhesives, ensuring proper load distribution and mechanical integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Employ specialized saw blades or router bits designed for plastic cutting to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause stress concentration and potential cracking in the nylon. | Use washers and ensure fasteners are snug but not excessively tight, allowing for thermal expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Protective Liners and Chute Liners, Machined Parts and Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||