This robust brass stock sheet is engineered for superior lubrication in demanding industrial settings. Its substantial thickness and inherent material properties ensure exceptional performance and longevity.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.719" |
| Length | 34" |
| Width | 22" |
Purpose-built for heavy-duty applications, this brass stock sheet offers a substantial 0.719" thickness for maximum durability and load-bearing capacity. The material, brass, is selected for its inherent self-lubricating properties and excellent wear resistance, making it ideal for sliding components, bushings, and bearing surfaces where friction reduction is paramount. Its precise dimensions of 34" in length and 22" in width provide ample material for custom fabrication of critical wear parts in machinery and equipment operating under extreme conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both mating surfaces thoroughly to remove any contaminants. 2. Position the brass stock sheet precisely against the designated wear surface. 3. Securely fasten the stock sheet using appropriate mechanical fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to premature wear. | Always ensure mating surfaces are meticulously cleaned and free of debris before installation. |
| Uneven fastening causing stress concentrations. | Utilize a systematic fastening pattern to distribute load evenly across the stock sheet. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty machine components, Industrial bushings and bearings, Wear plates in high-friction environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||