This 0.718-inch thick Nylon stock sheet offers exceptional strength and durability for critical suspending and bracing applications. Precisely manufactured to meet rigorous engineering standards.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.718" |
| Length | 19" |
| Width | 37" |
Specified by design engineers worldwide, this Nylon stock sheet provides robust performance in demanding environments. With a precise thickness of 0.718 inches and dimensions of 19 inches by 37 inches, its inherent properties of high tensile strength, excellent abrasion resistance, and good impact absorption make it ideal for load-bearing components. This material is engineered for applications requiring reliable structural support and long-term wear resistance, ensuring operational integrity under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and cut the Nylon sheet to the required dimensions using appropriate cutting tools. 2. Prepare mounting surfaces, ensuring they are clean, dry, and capable of supporting the intended load. 3. Secure the Nylon sheet using high-strength fasteners, ensuring even distribution of stress across the mounting points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that may damage the Nylon or compromise structural integrity. | Employ fasteners specifically designed for use with Nylon, considering load capacity and potential for stress concentration. |
| Over-tightening fasteners, which can lead to cracking or deformation of the Nylon sheet. | Tighten fasteners to the recommended torque specification, ensuring a secure fit without excessive pressure. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Industrial bracing and support structures, Custom suspension components, Wear pads and protective elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||