This heavy-duty brass stock sheet, measuring 0.717 inches thick, 17 inches in length, and 36 inches in width, is engineered for superior performance in abrasive and polishing environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.717" |
| Length | 17" |
| Width | 36" |
A proven choice for industrial professionals, this brass stock sheet boasts a substantial 0.717" thickness, ensuring exceptional durability and resistance to deformation under high stress. Its inherent machinability and non-sparking properties make it ideal for a wide array of abrading and polishing applications where precision and safety are paramount. The copper-zinc alloy composition provides excellent corrosion resistance, extending the service life of components in challenging industrial settings. This material's density and thermal conductivity are optimized for consistent performance during abrasive processes, preventing overheating and ensuring uniform finishes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for installation is clean, dry, and free from contaminants. 2. Carefully position the brass stock sheet according to the project's design specifications. 3. Secure the sheet using appropriate fasteners or adhesive methods, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or unsuitable fasteners. | Employ fasteners specifically rated for the tensile strength and shear forces expected in the application to prevent premature failure. |
| Inadequate surface preparation prior to bonding. | Thoroughly clean and abrade the mating surfaces to promote optimal adhesion and prevent delamination. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom abrasive tooling fabrication, Specialized polishing fixtures, Wear-resistant industrial components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||