Engineered for optimal friction reduction and wear resistance, this 0.716-inch thick brass stock sheet is a premium choice for critical lubricating components in demanding industrial settings.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.716" |
| Length | 26" |
| Width | 45" |
Designed for demanding industrial environments, this brass stock sheet offers superior self-lubricating properties due to its intrinsic material composition. With a precise thickness of 0.716 inches, a length of 26 inches, and a width of 45 inches, it is ideally suited for machining into bushings, bearings, wear pads, and sliding components that require low friction and exceptional durability. The brass alloy ensures good thermal conductivity and resistance to corrosion, making it suitable for operation under moderate loads and speeds in a variety of manufacturing and processing machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the brass stock sheet to the required dimensions using appropriate machining tools. 2. Machine the cut material to create the final component, ensuring tight tolerances for optimal performance. 3. Install the finished component into its designated application, ensuring proper alignment and lubrication points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper lubrication, leading to tool wear and poor cut quality. | Employ cutting fluids and sharp, high-speed steel or carbide tooling designed for brass machining. |
| Overheating the brass during machining, which can alter its material properties and reduce its lubricating effectiveness. | Maintain moderate cutting speeds and depths of cut to manage heat generation and utilize efficient cooling methods. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings, Wear plates for sliding mechanisms, Bearings in conveyor systems, Machine tool components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||