This robust Nylon stock sheet provides exceptional dielectric strength and mechanical resilience. Its precise dimensions ensure consistent performance in critical electrical and lighting infrastructure applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.714" |
| Length | 21" |
| Width | 43" |
Built to exacting engineering tolerances, this 0.714-inch thick Nylon stock sheet measures 21 inches in length and 43 inches in width. Nylon's inherent properties of high tensile strength, excellent abrasion resistance, and superior electrical insulation make it ideal for demanding environments. Its low coefficient of friction and good thermal stability further enhance its suitability for components requiring durability and resistance to wear. This material excels in applications where mechanical stress and electrical isolation are paramount, such as busbar supports, insulating barriers, and structural components in electrical enclosures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris. 2. Accurately cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using compatible fasteners, ensuring proper electrical grounding if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting tools, leading to ragged edges and potential stress concentrations. | Utilize sharp, high-speed cutting tools specifically designed for plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause localized stress and potential cracking of the Nylon material. | Employ appropriate torque settings for fasteners and consider using washers to distribute pressure evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical Insulating Barriers, Busbar Supports and Spacers, Structural Components in Enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||