This robust carbon steel stock sheet, measuring 0.711" thick, 40" long, and 36" wide, is engineered for exceptional performance in pneumatic systems. It offers superior structural integrity and durability.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.711" |
| Length | 40" |
| Width | 36" |
Manufactured under strict quality controls, this 0.711" thick carbon steel stock sheet boasts a substantial 40" x 36" dimension, providing ample material for a variety of pneumatic component fabrication. Its high tensile strength and impact resistance make it ideal for high-pressure environments. The material's inherent toughness ensures longevity and reliability in demanding industrial applications, resisting deformation and wear under extreme operating conditions. Precision cut for consistent dimensions, it facilitates accurate machining and assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity before cutting. 2. Machine to precise specifications for pneumatic component design. 3. Ensure all edges are deburred and surfaces are clean before integration into pneumatic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized material for high-pressure pneumatic components. | Always select stock sheet material with sufficient thickness and tensile strength ratings to exceed the maximum operating pressure and stress requirements of the pneumatic system. |
| Inadequate surface preparation leading to premature corrosion or sealing failures. | Thoroughly clean and degrease the carbon steel surface after machining and before assembly to ensure optimal adhesion of coatings and proper sealing. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Cylinder Fabrication, High-Pressure Pneumatic Manifold Construction, Pneumatic Valve Body Machining.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||