This high-quality carbon steel stock sheet offers superior strength and durability. Precisely manufactured to 0.710" thickness, 44" length, and 25" width, it's an essential raw material for demanding industrial projects.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.710" |
| Length | 44" |
| Width | 25" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a substantial 0.710" (approximately 18.03 mm) thickness, providing exceptional structural integrity. Its dimensions of 44" (approximately 1118 mm) in length and 25" (approximately 635 mm) in width make it suitable for a wide range of fabrication tasks. The inherent properties of carbon steel, including high tensile strength and formability, ensure reliable performance in applications such as heavy-duty bracing, machine bases, and structural supports where material robustness is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure material is free from contaminants and defects before use. 2. Cut to desired dimensions using appropriate cutting tools (e.g., plasma, laser, or abrasive saw). 3. Prepare edges for welding or joining as per project specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or low-grade steel for high-stress applications. | Always verify material specifications and choose steel grades appropriate for the intended load and environmental conditions. |
| Inadequate edge preparation leading to weak welds. | Properly bevel and clean all edges prior to welding to ensure full penetration and structural soundness. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Structural Fabrication, Heavy Machinery Components, Industrial Frameworks.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||