This premium brass stock sheet is engineered for superior performance in material handling applications. Its substantial thickness and robust brass composition ensure long-term durability and resistance to wear and tear.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.710" |
| Length | 46" |
| Width | 28" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.710 inches in thickness, 46 inches in length, and 28 inches in width. Composed of a high-copper alloy, it exhibits excellent machinability, superior corrosion resistance, and good electrical conductivity, making it ideal for environments where exposure to moisture or mild chemicals is a concern. The dense, non-magnetic properties of brass also contribute to its suitability for vibration-dampening components and applications requiring non-sparking characteristics.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Position the brass stock sheet accurately according to the design specifications. 3. Secure the sheet using appropriate fasteners, ensuring even load distribution to prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners. | Utilize fasteners of sufficient diameter and tensile strength to properly support the substantial weight and stress on the 0.710" thick sheet. |
| Inadequate surface preparation. | Thoroughly clean and degrease the mounting surface to ensure optimal adhesion and prevent premature failure due to contaminants. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Customized material handling platforms, Heavy-duty conveyor components, Protective plating for industrial equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||