This high-performance polycarbonate stock sheet offers excellent wear resistance and low friction, making it ideal for demanding lubrication applications. Precisely manufactured for consistent performance and durability.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.708" |
| Length | 17" |
| Width | 45" |
Manufactured under strict quality controls, this 0.708-inch thick polycarbonate stock sheet measures 17 inches in length and 45 inches in width. Its superior impact strength, excellent dimensional stability, and inherent low coefficient of friction make it an optimal choice for components requiring reduced wear and smooth operation. This material is engineered for applications demanding self-lubricating properties and extended service life in dynamic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Carefully cut the polycarbonate sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component using compatible fasteners, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ specialized router bits or saw blades designed for polycarbonate to prevent chipping and ensure clean cuts. |
| Excessive clamping pressure during installation. | Apply moderate clamping pressure to avoid stressing the polycarbonate and causing premature cracking or deformation. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction bearings and bushings, Wear strips and guides, Conveyor system components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||