This 0.708-inch thick 304 stainless steel stock sheet offers exceptional corrosion resistance and formability. Engineered for lubricating applications, it ensures smooth operation and extended component life in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.708" |
| Length | 13" |
| Width | 15" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet is manufactured to precise tolerances, measuring 0.708" in thickness, 13" in length, and 15" in width. The inherent properties of 304 stainless steel, including its excellent corrosion resistance and moderate strength, make it an ideal material for components subjected to friction and chemical exposure within lubricating systems. Its austenitic structure ensures good ductility and weldability, facilitating integration into complex machinery. This material is commonly specified for bearings, guides, and other wear surfaces in food processing, chemical handling, and general industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Carefully position the stock sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, such as welding, bolting, or mechanical interlocking, ensuring proper alignment to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a thinner gauge material for high-stress lubricating components. | Always verify the required thickness and material strength for the specific application to prevent premature failure. |
| Improper surface preparation leading to adhesion issues. | Thoroughly clean and degrease the sheet surface before installation to ensure optimal performance of any applied lubricants or coatings. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Bearing surfaces in high-friction environments, Slide guides for automated machinery, Components within fluid handling and lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||