This 0.707-inch thick Aluminum 6061 stock sheet, sized at 29" x 20", is engineered for superior performance in abrading and polishing tasks. Its excellent machinability and corrosion resistance ensure consistent results and longevity.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.707" |
| Length | 29" |
| Width | 20" |
Built to exacting engineering tolerances, this Aluminum 6061 stock sheet measures a precise 0.707 inches in thickness, 29 inches in length, and 20 inches in width. 6061-T6 alloy, known for its excellent weldability, brazeability, and formability, provides a robust substrate for demanding surface finishing operations. Its balanced composition of magnesium and silicon offers superior strength-to-weight ratio and resistance to general corrosion, making it suitable for both prototyping and high-volume production in environments requiring fine surface finishes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate surface for adhesion or further processing. 2. Ensure proper alignment and secure the Aluminum 6061 sheet to the work area. 3. Proceed with the intended abrading or polishing operation, utilizing appropriate tooling and media.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inconsistent pressure during abrasive application, leading to uneven surface finish. | Employ a consistent, measured pressure across the entire surface area to achieve a uniform finish. |
| Employing the wrong grit of abrasive media for the desired surface roughness. | Select abrasive grit sizes that align with the specific surface finish requirements, starting with coarser grits and progressing to finer ones as needed. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Surface preparation for coatings and plating, Fine finishing of decorative components, Preparation for anodizing and other surface treatments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||