This robust 0.706" thick Nylon stock sheet offers superior mechanical strength and wear resistance. Engineered for durability, it's the ideal raw material for fabricating critical components in demanding industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.706" |
| Length | 16" |
| Width | 23" |
Designed for demanding industrial environments, this 0.706" thick Nylon stock sheet delivers exceptional performance. Its superior tensile strength, excellent impact resistance, and high abrasion tolerance make it suitable for load-bearing components and wear surfaces. The material exhibits good chemical resistance to oils, greases, and common solvents. Dimensions of 16" x 23" provide ample material for diverse fabrication needs. Ideal for machining into gears, bushings, wear pads, and custom tooling where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of contaminants. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Mechanically fasten or adhere the fabricated Nylon component to the designated assembly using industry-standard methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper coolant, leading to excessive heat and potential material degradation. | Employ sharp carbide-tipped saw blades or routers with adequate coolant to maintain low temperatures during cutting. |
| Over-tightening fasteners, which can induce stress concentrations and lead to premature cracking or deformation of the Nylon. | Utilize washers and torque fasteners to recommended specifications, avoiding excessive compression of the Nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides, Gears and sprockets, Bushings and bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||