This high-quality carbon steel stock sheet, precisely 0.703 inches thick, 33 inches long, and 14 inches wide, is manufactured for demanding pneumatic applications requiring exceptional durability and structural integrity.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.703" |
| Length | 33" |
| Width | 14" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a substantial 0.703" thickness, providing superior strength and rigidity for critical pneumatic components. Its robust 33" x 14" dimensions offer ample material for fabrication of housings, mounting plates, and support structures. The inherent tensile strength and hardness of carbon steel ensure resistance to high pressures and mechanical stresses common in pneumatic systems. This material is ideal for applications demanding long service life and minimal deformation under load, guaranteeing consistent operational performance and safety.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the stock sheet by cleaning all surfaces to remove any debris or oils. 2. Carefully measure and mark the desired cut lines according to engineering drawings. 3. Execute precise cuts using appropriate industrial cutting equipment, ensuring smooth edges.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not rated for thick carbon steel, leading to poor edge quality and potential material deformation. | Employ high-quality, industrial-grade cutting equipment such as abrasive waterjets, plasma cutters, or heavy-duty band saws specifically designed for thick metal stock. |
| Inadequate surface preparation before fabrication, resulting in poor weld adhesion or compromised surface finish. | Thoroughly degrease and grind the cut edges and mating surfaces to a clean, bright metal finish prior to welding or assembly. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder components, High-pressure manifold fabrication, Industrial actuator housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||