This robust carbon steel stock sheet, specifically formulated for lubricating applications, offers exceptional durability and wear resistance. Its precise dimensions and material properties make it a critical component for demanding industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.702" |
| Length | 26" |
| Width | 26" |
A high-performance industrial component, this 0.702" thick carbon steel stock sheet boasts a precise 26" x 26" dimension. Manufactured from a high-grade carbon steel, it exhibits superior tensile strength and hardness, optimized for reduced friction and enhanced lubricant retention. Its inherent lubricity and resistance to galling make it an ideal substrate for applications involving sliding contact, such as bearings, wear plates, and specialized machinery components where consistent lubrication is paramount for operational longevity and efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Position the stock sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners or bonding agents as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or premature wear. | Thoroughly clean and degrease all mating surfaces before installation. |
| Using incorrect fasteners that can damage the carbon steel or compromise its integrity. | Consult material compatibility charts and use fasteners specifically rated for carbon steel applications. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: High-wear bearing surfaces, Sliding guides and rails, Specialized industrial lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||