This 0.702-inch thick carbon steel stock sheet, measuring 42x42 inches, is engineered for robust performance in pneumatic systems. Its superior strength and durability ensure reliable operation under pressure.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.702" |
| Length | 42" |
| Width | 42" |
Specified by design engineers worldwide, this 0.702" thick carbon steel stock sheet offers exceptional tensile strength and yield point, crucial for high-pressure pneumatic applications. The 42" x 42" dimensions provide ample material for fabrication of custom enclosures, manifolds, and structural components. Its consistent grain structure and surface finish facilitate precise machining and welding, ensuring integrity in critical pneumatic assemblies. This material is chosen for its cost-effectiveness and proven performance in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly cleaned and free of contaminants before fabrication. 2. Utilize appropriate cutting and shaping tools designed for 0.702" carbon steel. 3. Employ suitable welding procedures and consumables for carbon steel to achieve robust joints.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard mild steel for high-pressure pneumatic components. | Always verify material specifications and ensure it meets the required tensile strength and yield point for the intended pneumatic pressure. |
| Inadequate surface preparation before welding or coating. | Thoroughly degrease and remove mill scale or rust to ensure proper adhesion and prevent weld defects. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic Manifold Fabrication, High-Pressure Pneumatic Enclosures, Industrial Automation Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||