This robust brass stock sheet, measuring 0.698 inches thick, 40 inches long, and 33 inches wide, offers exceptional strength and corrosion resistance for critical suspending and bracing applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.698" |
| Length | 40" |
| Width | 33" |
Engineered for reliability and performance, this brass stock sheet exhibits a nominal thickness of 0.698" (17.73mm), a length of 40" (1016mm), and a width of 33" (838.2mm). Composed of a high-quality brass alloy, it provides excellent tensile strength and ductility, making it suitable for applications demanding structural integrity and resistance to environmental degradation. Its machinability and formability allow for custom fabrication in demanding industrial and marine environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Precisely cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the brass sheet using corrosion-resistant fasteners appropriate for the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that do not adequately support the sheet's weight. | Select fasteners with sufficient shear strength and diameter to distribute load effectively. |
| Improper edge preparation leading to stress concentrations. | Smooth and deburr all cut edges to prevent premature failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Structural bracing in corrosive environments, Custom marine hardware fabrication, Heavy-duty suspension components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||