This premium Nylon stock sheet offers exceptional durability and dimensional stability. Ideal for precision measuring, inspection fixtures, and fabrication in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.695" |
| Length | 30" |
| Width | 26" |
Manufactured under strict quality controls, this 0.695" thick Nylon stock sheet boasts a precise 30" length and 26" width. Nylon's inherent properties of high tensile strength, excellent wear resistance, and low coefficient of friction make it an ideal substrate for jigs, fixtures, and templates. Its machinability allows for intricate designs and tight tolerances, ensuring reliable performance in rigorous inspection and measuring applications. The material's resistance to chemicals and impact further enhances its suitability for challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Position the Nylon stock sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to material deformation. | Use a torque wrench to apply specified torque, ensuring consistent clamping pressure. |
| Improper cleaning of the sheet before use, affecting accuracy. | Clean the Nylon surface with a mild detergent and water, then dry thoroughly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Precision Measuring Gauges, Inspection Fixtures, Template Fabrication, Wear Plates, Die Cutting Surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||