This premium 0.693-inch thick Nylon stock sheet, measuring 19"x19", offers exceptional mechanical strength and wear resistance. Engineered for robust performance in demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.693" |
| Length | 19" |
| Width | 19" |
Manufactured under strict quality controls, this 0.693" thick Nylon stock sheet (19"x19") exhibits a robust combination of high tensile strength, excellent abrasion resistance, and good impact toughness. Its inherent lubricity minimizes friction, making it suitable for bearing surfaces and wear pads. The material's low coefficient of friction and good chemical resistance further enhance its utility in diverse operational settings. This grade is specifically formulated for applications where consistent performance and longevity are paramount, including wear components, structural parts, and custom fabricated items.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free from contaminants. 2. Carefully measure and cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the component using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or rough edges. | Utilize sharp, carbide-tipped saw blades or routers specifically designed for cutting Nylon to achieve clean, precise edges. |
| Over-tightening fasteners, which can cause stress concentration and potential cracking in the Nylon. | Apply fasteners with moderate torque, and consider using washers to distribute the load evenly across the Nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear plates and guide rails, Bushings and bearings, Custom machine components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||