This robust 0.689-inch thick Nylon stock sheet offers exceptional durability and wear resistance for demanding industrial environments. Its substantial dimensions provide ample material for a wide range of custom fabrication needs.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.689" |
| Length | 47" |
| Width | 20" |
A high-performance industrial component, this Nylon stock sheet boasts a significant 0.689" thickness, ensuring superior structural integrity and impact resistance. Manufactured from high-grade Nylon, it exhibits excellent abrasion resistance, low coefficient of friction, and good electrical insulating properties, making it suitable for heavy-duty applications where wear, friction, and electrical isolation are critical. The generous 47" length and 20" width facilitate efficient cutting and fabrication of larger components or multiple smaller parts, minimizing waste and optimizing material utilization.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the desired dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with suitable blade) to achieve precise cuts. 3. Smooth any rough edges with sandpaper or a deburring tool for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ specialized blades for plastics or high-speed steel blades with adequate cooling to prevent heat buildup and ensure clean cuts. |
| Applying excessive force during drilling or machining, causing stress cracks. | Use sharp drill bits and cutting tools, and maintain appropriate feed rates and speeds to avoid overheating and stress concentration. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom machined parts and components, Wear pads and bearing surfaces, Electrical insulators and spacers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||