This robust brass stock sheet, precisely manufactured to 0.688" thickness, offers exceptional durability and corrosion resistance. Its large dimensions (41" x 28") make it suitable for custom fabrication in demanding filtration environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.688" |
| Length | 41" |
| Width | 28" |
Built to exacting engineering tolerances, this brass stock sheet is composed of a high-copper alloy, ensuring excellent machinability and resistance to common industrial fluids. The substantial 0.688" (approximately 17.5mm) thickness provides superior structural integrity for demanding filter media support and containment applications. Its precise dimensions of 41" x 28" allow for efficient material utilization in custom-sized filtration units and housings, meeting stringent performance requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the cut sheet into the filtration housing or support structure using recommended industrial fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs or material deformation. | Utilize carbide-tipped blades or waterjet cutting for clean, precise cuts on brass stock. |
| Inadequate cleaning before installation, which can compromise filtration efficiency. | Thoroughly degrease and rinse the brass sheet with a mild detergent and water before assembly. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom filtration media support, Industrial fluid strainers, Aerospace component fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||