This premium brass stock sheet, precisely machined to 0.683" thickness, offers exceptional stability and flatness for demanding measuring and inspecting applications. Its robust brass composition ensures longevity and resistance to environmental factors.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.683" |
| Length | 23" |
| Width | 35" |
Built to exacting engineering tolerances, this 0.683" thick brass stock sheet measures 23" in length and 35" in width. Composed of a high-grade brass alloy, it exhibits superior dimensional stability, excellent machinability, and inherent corrosion resistance, making it ideal for use as master reference standards, precision layout surfaces, and critical component inspection fixtures. The material's density and thermal expansion characteristics are well-suited for environments where accuracy is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface receiving the brass sheet is clean, level, and free from debris. 2. Carefully position the brass sheet onto the prepared surface, avoiding any sliding motion that could cause scratches. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to maintain flatness.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Mounting the sheet on an uneven surface, leading to distortion and inaccurate measurements. | Always verify and prepare the mounting surface for flatness and levelness prior to installation. |
| Using excessive force or uneven tightening of fasteners, which can warp the brass sheet. | Apply fasteners with moderate, uniform torque, and consider using washers to distribute pressure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Master reference standards for calibration, Precision layout and scribing surfaces, Fixtures for dimensional inspection of manufactured parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||