This high-quality brass stock sheet is engineered for optimal lubrication. Its precise dimensions and material composition make it ideal for applications requiring low friction and wear resistance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.683" |
| Length | 38" |
| Width | 31" |
Specified by design engineers worldwide, this brass stock sheet offers superior lubricating properties due to its inherent material characteristics. With a precise thickness of 0.683 inches, a length of 38 inches, and a width of 31 inches, it provides ample material for custom fabrication. The brass alloy ensures excellent thermal conductivity and corrosion resistance, making it suitable for sliding components, bearings, and wear pads in machinery and equipment where friction reduction is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of contaminants. 2. Precisely machine the brass sheet to the required component dimensions and tolerances. 3. Affix the fabricated component securely to the intended application using appropriate fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to reduced lubrication effectiveness. | Thoroughly clean and degrease both the brass component and the mating surface before installation. |
| Over-tightening fasteners which can deform the brass and compromise its lubricating function. | Apply fasteners with the recommended torque specifications to avoid material distortion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearing surfaces, Wear pads and guides, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||