This substantial brass stock sheet offers exceptional durability and machinability for heavy-duty industrial sawing and cutting operations. Precisely manufactured for consistent performance in demanding environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.682" |
| Length | 23" |
| Width | 32" |
Designed for demanding industrial environments, this 0.682-inch thick brass stock sheet provides superior performance in sawing and cutting applications. Its precisely controlled alloy composition (typically a high-copper brass alloy) ensures excellent machinability, reduced tool wear, and optimal chip formation for clean cuts. The generous dimensions of 23 inches by 32 inches allow for efficient fabrication of larger components and reduce material waste. This sheet exhibits excellent corrosion resistance and formability, making it suitable for applications requiring both structural integrity and aesthetic appeal where precision cutting is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Secure the brass stock sheet firmly to your sawing or cutting surface using appropriate clamps or fixtures. 2. Ensure the cutting tool (saw blade or cutting bit) is the correct type and size for brass and the specified thickness. 3. Execute the cut using controlled feed rates and appropriate lubrication to prevent overheating and ensure a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting tools. | Always use sharp, high-quality blades or bits specifically designed for cutting brass to prevent chipping, excessive heat, and poor finish. |
| Improper clamping or fixturing of the sheet. | Ensure the brass sheet is securely held to prevent vibration and movement during cutting, which can lead to inaccurate cuts and potential safety hazards. |
| Excessive cutting speed or feed rate. | Utilize moderate feed rates and speeds appropriate for brass to avoid overheating, which can degrade the material and damage cutting tools. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Precision component fabrication, Industrial tooling and fixtures, Custom metalwork and prototyping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||