This industrial-grade Nylon stock sheet provides superior strength and durability. Its robust material properties make it ideal for high-wear components and structural support in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.677" |
| Length | 18" |
| Width | 34" |
Trusted by engineers across multiple sectors, this Nylon stock sheet (0.677" thickness, 18" width, 34" length) exhibits exceptional tensile strength, high impact resistance, and excellent abrasion and wear characteristics. Its low coefficient of friction reduces wear and tear on mating parts. This material is also resistant to chemicals, oils, and greases, making it suitable for harsh industrial settings. Commonly used for bearings, bushings, wear pads, and structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the desired dimensions using appropriate cutting tools for plastics. 2. Prepare the mating surfaces for secure fastening or integration. 3. Install the component, ensuring proper alignment and load distribution according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to delamination or rough edges. | Utilize sharp, carbide-tipped blades specifically designed for cutting plastics to achieve clean, precise cuts. |
| Overheating the material during machining, causing melting or deformation. | Employ adequate cooling techniques, such as air jets or coolant, and maintain appropriate feed rates to prevent heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Guide Rails and Rollers, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||