This robust 0.675-inch thick polycarbonate sheet offers exceptional impact resistance and clarity. Measuring 24 inches by 41 inches, it's engineered for demanding industrial applications requiring superior durability.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.675" |
| Length | 41" |
| Width | 24" |
Manufactured under strict quality controls, this 0.675" thick polycarbonate sheet boasts superior impact strength (Izod impact strength > 150 ft-lb/in) and excellent optical clarity. Its dimensions of 41" length and 24" width provide ample material for large-scale fabrication. With a high tensile strength of approximately 9,000 psi and a temperature resistance up to 270°F, it is ideal for machine guarding, protective barriers, and architectural glazing in industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure cutting tools are sharp and designed for polycarbonate to prevent cracking. 2. Securely fasten the sheet using appropriate hardware, allowing for thermal expansion. 3. Clean the surface with mild soap and water; avoid abrasive cleaners or solvents.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or inappropriate cutting tools, leading to chipping or cracking. | Utilize carbide-tipped blades specifically designed for plastics or high-speed saws with adequate cooling. |
| Over-tightening fasteners, causing stress and potential failure in the sheet. | Employ washers and allow for a slight gap around fasteners to accommodate thermal expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Industrial Machine Guarding, Protective Safety Barriers, Glazing for High-Impact Areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||