This high-grade brass stock sheet is engineered for critical safety applications. Its robust composition offers excellent durability and non-sparking properties, ensuring reliable performance in hazardous environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.674" |
| Length | 44" |
| Width | 46" |
Precision-manufactured to tight tolerances, this 0.674-inch thick brass stock sheet measures 44 inches by 46 inches. Composed primarily of copper and zinc, it exhibits excellent corrosion resistance and is inherently non-sparking, making it ideal for environments where ignition sources must be eliminated. The material's conductivity and machinability further enhance its utility in specialized safety equipment fabrication and protective barriers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean, dry, and structurally sound. 2. Carefully position the brass stock sheet, aligning it with pre-determined mounting points or design specifications. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting, riveting) ensuring a firm and stable installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners for the application, leading to premature failure or galvanic corrosion. | Utilize fasteners made from compatible materials, such as stainless steel or brass, depending on the environmental exposure and load requirements. |
| Inadequate support or uneven mounting, causing stress concentrations and potential deformation of the sheet. | Ensure the sheet is supported by a continuous or adequately spaced frame, and verify that the mounting surface is flat and free from irregularities. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Non-sparking tool manufacturing, Explosion-proof enclosures, Static-dissipative flooring components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||