This high-strength carbon steel stock sheet provides a robust foundation for demanding pneumatic applications. Its substantial thickness ensures exceptional durability and load-bearing capacity.
| Standard | DIN 933 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.670" |
| Length | 20" |
| Width | 15" |
Manufactured under strict quality controls, this 0.670-inch thick carbon steel sheet exhibits superior tensile strength and rigidity, essential for high-pressure pneumatic component fabrication. Its dimensions of 20 inches in length and 15 inches in width offer ample material for custom machining of cylinders, manifolds, and structural supports. The inherent toughness of carbon steel makes it resistant to deformation and wear, ensuring long-term reliability in industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately mark cutting and machining lines according to design specifications. 3. Perform necessary fabrication operations (cutting, drilling, welding) using appropriate tooling and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel grades not rated for pneumatic pressures. | Always specify and use carbon steel grades with documented tensile strength and fatigue resistance suitable for the intended pneumatic application. |
| Inadequate surface preparation before welding or coating. | Thoroughly degrease and remove any mill scale or rust from the surface to ensure proper weld integrity and adhesion of protective coatings. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pneumatic cylinder construction, Manifold block fabrication, Heavy-duty pneumatic equipment frames.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||