This high-performance Nylon stock sheet is engineered for demanding applications requiring low friction and excellent wear resistance. Its self-lubricating properties make it ideal for continuous operation in challenging environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.669" |
| Length | 14" |
| Width | 47" |
Precision-manufactured to tight tolerances, this 0.669-inch thick Nylon stock sheet offers exceptional dimensional stability and consistent performance. Fabricated from high-quality, self-lubricating Nylon, it exhibits a low coefficient of friction, superior abrasion resistance, and excellent chemical inertness. This material is engineered to withstand significant loads and reduce wear on mating components, making it suitable for a wide range of industrial applications including bearings, bushings, wear strips, and guide rails where minimal lubrication is desired or feasible.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 3. Securely fasten the sheet to the substrate using mechanical fasteners, ensuring even pressure distribution to prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize carbide-tipped saws or routers specifically designed for cutting Nylon to achieve clean, precise edges. |
| Over-tightening fasteners, causing stress concentrations and potential material cracking. | Employ washers and tighten fasteners progressively to a specified torque, allowing for thermal expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Low-friction bearings and bushings, Wear strips and guide components, Chute liners and slide surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||