This premium brass stock sheet, specifically engineered for lubricating applications, offers exceptional wear resistance and a low coefficient of friction. Its robust dimensions provide ample material for custom fabrication in demanding environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.667" |
| Length | 17" |
| Width | 35" |
Trusted by engineers across multiple sectors, this 0.667-inch thick brass stock sheet (17" x 35") is manufactured to exacting tolerances for superior performance in lubricating applications. Composed of a proprietary brass alloy, it exhibits excellent machinability, corrosion resistance, and inherent self-lubricating properties that significantly reduce wear and extend component lifespan in high-friction environments. Ideal for bearings, bushings, and sliding components where consistent lubrication is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or contaminants. 2. Carefully position the brass stock sheet according to the design specifications. 3. Secure the sheet using appropriate fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that could damage the brass or compromise lubrication. | Utilize fasteners made of compatible materials (e.g., stainless steel, brass) and apply them with calibrated torque to prevent over-tightening. |
| Failure to adequately deburr edges after cutting, leading to potential material shedding or damage to mating parts. | Employ a precise deburring tool to create smooth, chamfered edges on all cut surfaces. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates and guides, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||