This precision-engineered Nylon stock sheet offers exceptional durability and wear resistance. Its substantial 0.658" thickness makes it ideal for demanding applications requiring robust material support and dimensional stability.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.658" |
| Length | 22" |
| Width | 37" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.658 inches in thickness, 22 inches in width, and 37 inches in length. Composed of high-performance nylon, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction. Its inherent chemical resistance and self-lubricating properties make it suitable for applications involving moderate loads and sliding contact, such as wear pads, bearing components, and custom tooling.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Use appropriate cutting tools for nylon, such as band saws or CNC routers, with proper blade selection and feed rates. 3. Deburr edges thoroughly after cutting to remove any sharp protrusions.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard saw blades not designed for plastics. | Employ carbide-tipped blades with a high tooth count for clean cuts and to prevent melting. |
| Overheating the material during cutting. | Maintain moderate cutting speeds and use cooling lubricants if necessary to prevent material deformation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom jigs and fixtures, Wear strips and guides, Bearing surfaces and bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||