High-quality carbon steel stock sheet, precisely manufactured to 0.656" thickness, 47" length, and 35" width. Ideal for robust electrical enclosures and lighting fixtures requiring structural integrity.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.656" |
| Length | 47" |
| Width | 35" |
Specified by design engineers worldwide, this 0.656" thick carbon steel stock sheet offers exceptional tensile strength and formability, essential for demanding electrical and lighting applications. Its 47" x 35" dimensions provide ample material for fabricating custom enclosures, mounting brackets, and structural components. The material's inherent durability ensures long-term performance in diverse environmental conditions, offering a cost-effective solution without compromising on structural integrity or electrical safety standards.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly handled and supported to prevent damage or injury. 2. Precisely cut the carbon steel sheet to the required dimensions using appropriate cutting tools (e.g., plasma cutter, shear). 3. Fabricate and assemble components according to design specifications, utilizing welding, bolting, or other suitable joining methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inaccurate cutting leading to material waste and dimensional inaccuracies. | Utilize precise measurement tools and calibrated cutting equipment, with experienced personnel overseeing the process. |
| Inadequate surface preparation prior to finishing or coating, resulting in poor adhesion and corrosion susceptibility. | Thoroughly clean and degrease the steel surface, followed by appropriate surface treatment (e.g., grit blasting) before applying any protective coatings. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Electrical Enclosure Fabrication, Lighting Fixture Housings, Control Panel Construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||