This 0.655" thick Nylon stock sheet offers exceptional mechanical strength and durability. Its robust properties make it a reliable raw material for a wide array of demanding industrial components and fabrication.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.655" |
| Length | 47" |
| Width | 22" |
A proven choice for industrial professionals, this 0.655" thick Nylon stock sheet, measuring 47" in length and 22" in width, exhibits excellent tensile strength, impact resistance, and abrasion resistance. Nylon's inherent lubricity reduces friction, making it suitable for wear components, gears, bushings, and bearings. Its chemical resistance to oils, greases, and common solvents further enhances its utility in harsh operating environments. This material's machinability allows for precise custom component fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated component using suitable fasteners or adhesives, considering the material's expansion/contraction.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, which can lead to stress cracking in Nylon. | Use washers and torque fasteners to the manufacturer's recommended specifications, allowing for slight material expansion. |
| Machining Nylon at excessively high speeds without adequate cooling, causing melting and tool wear. | Employ sharp cutting tools and maintain moderate cutting speeds with sufficient coolant or air blast to dissipate heat. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Industrial Bearings and Bushings, Gears and Sprockets, Wear Strips and Guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||