This high-quality brass stock sheet provides exceptional durability and corrosion resistance. Precisely manufactured to 0.655" thickness, 47" length, and 18" width, it's ideal for robust material handling solutions.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.655" |
| Length | 47" |
| Width | 18" |
Designed for demanding industrial environments, this brass stock sheet offers superior strength and longevity. With a precise thickness of 0.655 inches, a generous length of 47 inches, and a width of 18 inches, it meets stringent material handling requirements. The inherent properties of brass, including excellent corrosion resistance and moderate electrical conductivity, make it suitable for a wide range of applications where reliability and durability are paramount. Its machinability further enhances its versatility for custom fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the surface where the brass sheet will be installed to ensure proper adhesion or fastening. 2. Carefully position the brass sheet according to the design specifications. 3. Secure the brass sheet using appropriate fasteners (e.g., rivets, bolts, or welding) as dictated by the application's load and stress requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper fastener selection leading to premature failure or corrosion. | Utilize fasteners made of compatible materials (e.g., stainless steel or brass) to prevent galvanic corrosion and ensure structural integrity. |
| Exceeding the material's tensile strength or bending limits during fabrication. | Consult material property data and engineering drawings to understand the brass alloy's limitations and employ appropriate forming techniques. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabrication of material handling equipment components, Corrosion-resistant bases and supports for industrial machinery, Wear plates and protective shielding in high-traffic areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||